| 12.1 | Components for Inspection. | ||
| 12.1.1 | Cooling equipment. | ||
| 12.1.2 | Cooling distribution. | ||
| 12.1.3 | Operating controls. | ||
| |
|||
| 12.2 | Procedures for Inspection. | ||
| The Inspector will: |
|||
| 12.2.1 | Identify the type of central air conditioning system and energy sources. | ||
| 12.2.2 | Operate the system using normal control devices. | ||
| 12.2.3 | Open access panels or covers provided by the manufacturer or installer, if readily accessible. | ||
| 12.2.4 | Observe the condition of controls and operative components of the complete system, conditions permitting. | ||
| 12.2.5 | Observe the condition of a representative number of the central air cooling outlets in each habitable space of the house. | ||
| |
|||
| 12.3 | Limitations. | ||
The Inspector is not required to: |
|||
| 12.3.1 | Activate or operate cooling or other systems that have been shut-down. | ||
| 12.3.2 | Inspect gas-fired refrigeration systems, evaporative coolers, or wall or window-mounted air conditioning units. | ||
| 12.3.3 | Check the pressure of the system coolant or determine the presence of leakage. | ||
| 12.3.4 | Evaluate the capacity, efficiency, or adequacy of the system. | ||
| 12.3.5 | Operate equipment or systems if exterior temperature is below 60° Fahrenheit or when other circumstances are not conducive to safe operation or may damage the equipment. | ||
| 12.3.6 | Remove covers or panels that are not readily accessible. | ||
| 12.3.7 | Dismantle any equipment, controls, or gauges. | ||
| 12.3.8 | Check the electrical current drawn by the unit. | ||
| 12.3.9 | Operate digital-type thermostats or controls. | ||
| Back to Top | Go Back |
| Updated: 29-May-2003 | copyright NAHI™ - reprinted by permission |