| 7.1 | Components for Inspection. | ||
| 7.1.1 | Roof framing, sheathing and decking. | ||
| 7.1.2 | Attic insulation. | ||
| |
|||
| 7.2 | Procedures for Inspection. | ||
| The Inspector will: |
|||
| 7.2.1 | Describe material comprising the roof structure in the visible attic area. | ||
| 7.2.2 | Observe the condition of the visible roof structure and attic components where readily and safely accessible. | ||
| 7.2.3 | Investigate evidence of the presence of water penetration. | ||
| 7.2.4 | Determine the presence of attic insulation and its approximate thickness. | ||
| |
|||
| 7.3 | Limitations. | ||
The Inspector is not required to: |
|||
| 7.3.1 | Enter attic spaces with headroom of less than 5 feet, with insulation covering the ceiling joist, or bottom truss cord, or if there are obstructions, trusses, or other detrimental conditions. | ||
| 7.3.2 | Break or otherwise damage the surface finish or weather seal on or around access panels and covers. | ||
| Back to Top | Go Back |
| Updated: 07-May-2003 | copyright NAHI™ - reprinted by permission |